Fuel injector Specs

H3 Specific Information

Fuel injector Specs

Postby KHummer » Thu Apr 27, 2017 10:10 pm


2006 H3

Getting a misfire on cyl 2 code. After swapping our the plug and the coil to see if the issue followed I have determined they are not the issue.

I am not looking into testing the injector as the wires connected to the coils also seem perfectly fine.

Looking around I have found 2 ways to check the injectors for two different signs of failure. One way is to take a multi-meter and check the resistance across the injector and make sure it is within the tolerance.

Doing that is easy enough, what I don't know and can't seem to find is what that tolerance is supposed to be. Does anyone know what the resistance is supposed to be across the injectors?
Trail Novice
Trail Novice
Posts: 16
Joined: Sat Feb 07, 2015 2:49 am
Vehicle: 2006 H3

Re: Fuel injector Specs

Postby Mark » Mon May 01, 2017 3:36 pm

I did some searching in the service manual but unfortunately did not find anything.
Hummer X Club Florida Chapter
User avatar
Chapter President - Florida
Chapter President - Florida
Posts: 15104
Joined: Sat Apr 29, 2006 5:42 pm
Location: Orlando FL
Vehicle: 09 H3 Alpha/74 Int. Scout

Return to H3 Tech

Who is online

Users browsing this forum: No registered users and 4 guests